Appropriate Finish for Wheels

[Dave Wortley]

I never get a run at doing things these days and I seem to do many jobs in the early morning when I don't want to upset our neighbours. So I don 't manage to do a batch of wheels at one go using my compressor. Hence I end up using Plastikote spray cans for lots of small items eg. Headlamps, number plates and wheels. I start with Jenolite or Kurust for steel bits after wire brush, emery paper and wire wool followed by
2 coats of Plastikote primer and 3 or more coats of PlastiKote gloss. I have also used Moss brake drum black gloss in the past but it doesn't seem available any more.
Cheers,
Dave.