17-06-2018, 01:48 PM
I also still also run on 6 volt with my Ruby. I have a modification to my charging circuit made by one of our club members (PWA7C). By wiring the Dynamo slightly differently to make it a 2 brush unit and fitting an electric gizmo made by him it allows the battery to charge at a higher rate without damaging either the dynamo or battery. I have had it fitted now for over 4 years without problems and always have a battery with a good charge. I was about to say full charge but that would be incorrect as it goes down when pulling on the starter. However not long running before its back to full charge.
John Mason
John Mason
Would you believe it "Her who must be obeyed" refers to my Ruby as the toy.