03-06-2018, 04:22 PM
(03-06-2018, 04:14 PM)Ruairidh Dunford Wrote: If you are fitting MM hydraulic back plates you will also need to make the sides flat or like those pictured in Steve’s photos.
Roger that. I already have the backplates and whilst I could put the axle on the milling machine and be "precise" I think that I'll crack out the angle grinder for that job.
I also have the 50's style handbrake cable fixtures but I'm also considering a rod operated approach, with a pivot bracket on the axle as on the late Rubies. Opinions welcomed.
C