03-06-2018, 10:18 AM
(This post was last modified: 03-06-2018, 10:21 AM by Duncan Grimmond.)
In my experience powder coating is totally dependent on the preparation. I have had a range of quality varying from embarrassingly crap to top notch and variations in quality between half a dozen items in the same batch. If you choose powder coating go by recommendation, not price.
If you need to tighten up any spoke nipples you will damage the coating and allow water to get in which may be drawn in further by capillary action and rust away out of sight.
If you need to tighten up any spoke nipples you will damage the coating and allow water to get in which may be drawn in further by capillary action and rust away out of sight.