30-05-2018, 02:24 PM
I just received my order for screws from NTG Services (their item C219F), thinking, perhaps stupidly, that they would be right for the windscreen uprights on my 1932 Tourer. I assumed they would be 1/4" BSF, but they turned out to be tiny BA screws! Fortunately NTG will take these (very expensive) screws back for a refund.
If anyone is thinking of ordering screws from NTG then make sure you check the thread size with them first!
I have recently had 1/4" BSF countersunk raised head screws in a few different lengths from stainlessmiddleton.co.uk They don't do chrome finish but their stainless ones are bright polished and hard to distinguish from chrome. In the absence of chrome I shall be using them for sidescreen peg locking screws, dash panel screws and windscreen uprights.
If anyone is thinking of ordering screws from NTG then make sure you check the thread size with them first!
I have recently had 1/4" BSF countersunk raised head screws in a few different lengths from stainlessmiddleton.co.uk They don't do chrome finish but their stainless ones are bright polished and hard to distinguish from chrome. In the absence of chrome I shall be using them for sidescreen peg locking screws, dash panel screws and windscreen uprights.