Clutch toggle levers

[John Mims]

I use late type levers, with the hammerhead, and a four speed release bearing on a 3 speed engine and gear box. No problems. And no, I don't bother with mousetrap springs.
I know of a number of other people with the same set up. Much easier on the release bearing because it's not always revolving.

Charles

Thank you, Charles.

I will see if I can find a good 4 speed release bearing (although the 3-speed one is brand new).

John

---

I use late type levers, with the hammerhead, and a four speed release bearing on a 3 speed engine and gear box. No problems. And no, I don't bother with mousetrap springs.
I know of a number of other people with the same set up. Much easier on the release bearing because it's not always revolving.

Charles

Should have said that I used the combination you recommend on my own car, Charles. One of my sons has just bought an RN and it is the clutch on that we are trying to sort. It came with a brand new 3-speed release bearing, and it seemed a shame to not use it.