Yesterday, 10:19 AM
As an aside, when I reassembled the engine with new valves some of the cam followers/tappets were sticking so I gently polished them until they slid freely. I’m wondering now if they are sticking. I say that because the symptoms are just like poor timing. However the timing is optimum.
I have tried another carb’ but no different. New condenser is on the way, fuel pump is pumping ok, points are checked. No air leaks that I can see. Tappet clearances are next together with needle valve adjustment
I have tried another carb’ but no different. New condenser is on the way, fuel pump is pumping ok, points are checked. No air leaks that I can see. Tappet clearances are next together with needle valve adjustment