I have a Gordan Allen 1 1/2 Pressure fed crankshaft and matching rods in my engine.
It was all bought by my father in 1982 and did not find its way into an engine till the early 1990s.
It has never been re ground but I have changed the shells several times over the years.
The engine is due to be stripped down again as the rear main bearing needs replacing.
I seem to remember the Crank Rods and Shell Bearings came to about £700 in 1982.
I still have the original box the con rods came in.
It was all bought by my father in 1982 and did not find its way into an engine till the early 1990s.
It has never been re ground but I have changed the shells several times over the years.
The engine is due to be stripped down again as the rear main bearing needs replacing.
I seem to remember the Crank Rods and Shell Bearings came to about £700 in 1982.
I still have the original box the con rods came in.