06-02-2025, 09:06 AM
The gubbins inside my cut out for my Seven were missing when I bought it, so I intend to replace the coils with a Schottky diode. However, I am not sure what the resistance of the original resistance wire was in a 6 volt car. I can find plenty of information on-line about the value to use if converting to 12 volt, but I am not sure whether it would be same for 6 volt.
I am basing my conversion on this from the Cornwall Austin Seven Club website.
Jamie.
I am basing my conversion on this from the Cornwall Austin Seven Club website.
![[Image: image002.jpg]](https://www.austin7.org/TechnicalArticles/12vConversionsAnotherWay/image002.jpg)
Jamie.