Yesterday, 11:55 AM
Me neither. I'd suggest that no clearance is way more dangerous than quite a bit.
I'd hope for perhaps 3 or 4 thou as an ideal, but if it's been running that way and there's no sign of excessive or unusual wear then I'd be inclined to leave it alone.
Could you perhaps get a rough figure by measuring rotation in the spindle from the bottom end with the cam held still?
I'd hope for perhaps 3 or 4 thou as an ideal, but if it's been running that way and there's no sign of excessive or unusual wear then I'd be inclined to leave it alone.
Could you perhaps get a rough figure by measuring rotation in the spindle from the bottom end with the cam held still?