6 hours ago
Some time in the coming year I need to address rot in the floor of my RP.
In all honesty I have yet to make a comprehensive assessment, but I can confirm there are areas where the road is visible below.
I think it more than likely that the cills/ sills will need repair or replacement.
Probably rear arches too.
My question is, simply, can anyone point me to any helpful how-to's, write-ups, or even Youtube videos which go into the nitty-gritty of saloon floor repairs? I've made a basic search but didn't come up with much. I'm hoping to harvest as much wisdom as I can before embarking on the project.
Failing that, does anyone have any helpful experience to share?
Specific areas of interest:
1. Can this be done on the chassis? I'd very much prefer piecemeal repair in situ over a body-off, new floor approach, whatever the shortcomings.
2. How to maintain door opening shape and dimensions (is it really necessary to weld in braces?)
3. ...and how to avoid locking in distortions which might have been better corrected beforehand (e.g. door droop).
Any thoughts welcomed - thanks in advance.
In all honesty I have yet to make a comprehensive assessment, but I can confirm there are areas where the road is visible below.
I think it more than likely that the cills/ sills will need repair or replacement.
Probably rear arches too.
My question is, simply, can anyone point me to any helpful how-to's, write-ups, or even Youtube videos which go into the nitty-gritty of saloon floor repairs? I've made a basic search but didn't come up with much. I'm hoping to harvest as much wisdom as I can before embarking on the project.
Failing that, does anyone have any helpful experience to share?
Specific areas of interest:
1. Can this be done on the chassis? I'd very much prefer piecemeal repair in situ over a body-off, new floor approach, whatever the shortcomings.
2. How to maintain door opening shape and dimensions (is it really necessary to weld in braces?)
3. ...and how to avoid locking in distortions which might have been better corrected beforehand (e.g. door droop).
Any thoughts welcomed - thanks in advance.