Ulster Rep Rebuild - Gearbox release bearing pressing on clutch arms

[Erich]

Hi All, I'll note that the system worked fine before we went to the the later type toggles with the T shaped pressure bits. I had gotten advice that these were the way to go, so when my friend, Chris(Garner) rebuilt the engine a couple of years ago, he installed these later T type toggles which the mouse trap springs. At this point, we have a real dog's dinner. Three speed box, four speed bearing carrier without the spring or keeper(a mystery) and a leaf spring to pull the bearing away. On the other side we have a clutch with the four speed toggles and springs.

Best,

Erich