11-11-2024, 11:22 AM
(This post was last modified: 11-11-2024, 11:24 AM by Robert Leigh.
Edit Reason: typo
)
Depending how bad the corrosion is you may be able to use a standard 5/16" BSF stud by fitting a suitable helicoil. It is best to Loctite it in place. I prefer to use a stud than a bolt to keep future disturbance of your thread repair to a minimum. I always use a stainless steel stud and a stainless or brass dome headed nut with a fibre washer. This should eliminate any leakage along the thread.