20-05-2018, 07:15 PM
Hi Dave,
Yes; as Robert says, I forgot to mention minimising the hot spot. Hacksaw through between the inlet and exhaust in the middle and slot down above the manifold studs either side of the inlet. Make sure the heat shield bends under the float chamber to deflect warm rising air.
Keep your cool, Dave
Yes; as Robert says, I forgot to mention minimising the hot spot. Hacksaw through between the inlet and exhaust in the middle and slot down above the manifold studs either side of the inlet. Make sure the heat shield bends under the float chamber to deflect warm rising air.
Keep your cool, Dave