20-05-2018, 08:42 AM
Thanks Dave,
I will have a go at extending my ex manifold heat shield to isolate the float chamber from the radiant heatt but keep airflow around it. Chummy bonnets have no louvres so will devise something to lft the nearside an inch or so. What material do I need for the carb to manifold insulator. Red fibre would be good but I have used up the 6mm thick stuff.
I will have a go at extending my ex manifold heat shield to isolate the float chamber from the radiant heatt but keep airflow around it. Chummy bonnets have no louvres so will devise something to lft the nearside an inch or so. What material do I need for the carb to manifold insulator. Red fibre would be good but I have used up the 6mm thick stuff.