| The following warnings occurred: | ||||||||||||
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
|
|
RN accelerator pedal
|
20-05-2018, 07:48 AM
If you look at the bolt side of the pedal you will see that it is slotted and the bolt closes up the slot to clamp the pedal onto the shaft. With the bolt slack the pedal can move on the shaft quite a bit, the procedure is to hold the pedal up against the floor whilst tightening the clamp bolt/nut for which you need three hands. If you tighten the clamp with the pedal down then you will not achieve full throttle opening.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
RN accelerator pedal - by Tattybogle - 10-03-2018, 03:17 PM
RE: RN accelerator pedal - by Ian Williams - 10-03-2018, 08:06 PM
RE: RN accelerator pedal - by Hedd Jones - 10-03-2018, 10:47 PM
RE: RN accelerator pedal - by Damian GT - 19-05-2018, 05:20 PM
RE: RN accelerator pedal - by "Slack Alice" Simon - 19-05-2018, 08:48 PM
RE: RN accelerator pedal - by Dave Mann - 20-05-2018, 07:48 AM
RE: RN accelerator pedal - by Tattybogle - 22-05-2018, 03:17 PM
RE: RN accelerator pedal - by AustinWood - 22-05-2018, 03:47 PM
|
