09-09-2024, 03:42 PM
After engine rebuild refit etc the Ruby MK 2 is now starting and idling quite well. Problem we seem to have now is coolant leaking from a number of manifold stud brass nuts. The manifold itself does not seem to be leaking any exhaust gases or fuel.
Are there any well used fixes?
We were thinking of undoing one nut at a time and getting some blue hylomar in there before refitting washer and nut or is it best to tackle this at the cylinder head end and remove the manifold completely?
Are there any well used fixes?
We were thinking of undoing one nut at a time and getting some blue hylomar in there before refitting washer and nut or is it best to tackle this at the cylinder head end and remove the manifold completely?