The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
33 Seven Tourer up (and nearly fully) running
#14
I have replaced a rear core plug on an RP without cutting the bulkhead or removing the engine. A rusted core plug can usually be removed fairly easily with a suitably bent poking tool, and then the seating needs cleaning as best you can (your home made poking tool may be suitable). Smear a bit of sealant onto the recess and fit the new core plug, then push a small hammer head or other suitable lump of metal between the centre of the plug and the bulkhead so that the bulkhead bulges slightly. The use a hammer carefully to strike the centre of the bulge inside the car. This will seat the core plug in the usual way.
Reply


Messages In This Thread
RE: 33 Seven Tourer up (and nearly fully) running - by Robert Leigh - 06-09-2024, 01:19 PM

Forum Jump:


Users browsing this thread: 3 Guest(s)