The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.29 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ignition puzzle
#16
(13-08-2024, 08:52 PM)John Cornforth Wrote: Hi

In Ruby era cars with DK4's, the points are grounded via the distributor body which is solidly bolted to the dynamo housing and thence to the engine block, starter motor and then starter motor return cable back to the battery.

If you have an earlier DJ4 setup with manual advance, the distributor has to be loose enough to move. In that situation there may be a question mark over effective grounding of the points if it involves the vagaries of pieces of greased metal which may or may not touch all the time.  A dedicated ground pigtail from distributor body to dynamo housing would seem like a good idea.

In both cases it's worth checking that the grounded side of the points is indeed connected to the distributor case/body via whatever internal screws are used.

I'm assuming you have a good return connection from starter motor casing/engine block to the battery ?

The coil current when points are closed is about 4 amps, and the average current with points closed about 50% of the time is about 2 Amps.  So when checking whether connections are "good" we are looking for no more than about 0.1 ohms resistance, preferably less.
Thanks, John.
The engine/ starter has an earth direct back to the battery. On the DK4 I've used a swivel mount (I do like to fiddle...) so the earth problem is probably waiting to reappear. I'll take your advice and fit a pigtail from the distributor's body to the dynamo. Oddly, I've never had any trouble with DJ2s earthing before so it must be something to do with the way this car is set up electrically.
I took apart a JD2 and a DK4 to look at the fixed points posts to see if they were connected to the distributor body - but the post appears to be moulded into the plastic and there is no connection visual (same with the screw that holds the end of the capacitor down). But, using a test lead shows that they do earth to the body - with the connection presumably to the base holding-down screws. I did look on the forum for advice - but failed to find this most helpful one: https://www.austinsevenfriends.co.uk/for...p?tid=8427
Reply


Messages In This Thread
Ignition puzzle - by Tony Griffiths - 12-08-2024, 11:16 AM
RE: Ignition puzzle - by Ruairidh Dunford - 12-08-2024, 11:56 AM
RE: Ignition puzzle - by AustinWood - 12-08-2024, 12:09 PM
RE: Ignition puzzle - by bob46320 - 12-08-2024, 01:09 PM
RE: Ignition puzzle - by Alan - 12-08-2024, 01:40 PM
RE: Ignition puzzle - by Chris KC - 12-08-2024, 01:55 PM
RE: Ignition puzzle - by Tony Griffiths - 12-08-2024, 03:08 PM
RE: Ignition puzzle - by Alan - 12-08-2024, 03:35 PM
RE: Ignition puzzle - by Tony Griffiths - 12-08-2024, 03:50 PM
RE: Ignition puzzle - by Ruairidh Dunford - 12-08-2024, 04:07 PM
RE: Ignition puzzle - by John Cornforth - 12-08-2024, 05:25 PM
RE: Ignition puzzle - by Tony Griffiths - 12-08-2024, 11:39 PM
RE: Ignition puzzle - by John Cornforth - 13-08-2024, 08:11 AM
RE: Ignition puzzle - by Tony Griffiths - 13-08-2024, 08:03 PM
RE: Ignition puzzle - by John Cornforth - 13-08-2024, 08:52 PM
RE: Ignition puzzle - by Tony Griffiths - 13-08-2024, 10:40 PM
RE: Ignition puzzle - by AustinWood - 14-08-2024, 08:41 AM
RE: Ignition puzzle - by Tony Griffiths - 14-08-2024, 05:13 PM
RE: Ignition puzzle - by Ruairidh Dunford - 14-08-2024, 07:11 PM
RE: Ignition puzzle - by Tony Griffiths - 15-08-2024, 01:52 AM
RE: Ignition puzzle - by Ruairidh Dunford - 15-08-2024, 08:58 AM
RE: Ignition puzzle - by Tony Griffiths - 06-09-2024, 09:38 PM
RE: Ignition puzzle - by Ruairidh Dunford - 06-09-2024, 10:51 PM
RE: Ignition puzzle - by Dave Mann - 07-09-2024, 11:10 AM
RE: Ignition puzzle - by David Stepney - 07-09-2024, 12:28 PM
RE: Ignition puzzle - by Ivor Hawkins - 07-09-2024, 07:27 PM
RE: Ignition puzzle - by Steve kay - 07-09-2024, 07:38 PM
RE: Ignition puzzle - by Tony Griffiths - 07-09-2024, 08:13 PM

Forum Jump:


Users browsing this thread: 7 Guest(s)