02-08-2024, 10:37 AM
I can see from your photos that you have a standard Ruby drain tap fitted.
The spring and washer have been removed at some point.
It should be entirely possible to remove this without dismantling the entire front of the car. As mentioned above the tap is a taper seal, as a temporary fix, you could try tapping the front of the arm to resettle it back into the taper.
If you need further help, you are welcome to call me on 07754171005.
I have purchased new taps, like the one you currently have fitted, but I think they are out of stock, this will fit and work perfectly well: https://www.theaustinsevenworkshop.com/p...-drain-tap
Pull the leaver up to remove and fit these in situ.
The spring and washer have been removed at some point.
It should be entirely possible to remove this without dismantling the entire front of the car. As mentioned above the tap is a taper seal, as a temporary fix, you could try tapping the front of the arm to resettle it back into the taper.
If you need further help, you are welcome to call me on 07754171005.
I have purchased new taps, like the one you currently have fitted, but I think they are out of stock, this will fit and work perfectly well: https://www.theaustinsevenworkshop.com/p...-drain-tap
Pull the leaver up to remove and fit these in situ.