23-07-2024, 09:31 PM
In the peace and quiet of next week I'll go through all the suggestions, but as I was taught when I was a 'race engineer'
only change one element at any one time !!!!
No1 on the list is; check the valve gaps, but compression is good and it starts ok, its under load that it misbehaves .
then dizzy, coil, plugs,leads etc.
only change one element at any one time !!!!
No1 on the list is; check the valve gaps, but compression is good and it starts ok, its under load that it misbehaves .
then dizzy, coil, plugs,leads etc.