10-07-2024, 10:58 PM
I think you are referring to the slow running jet.
It is normal practice to remove the filter in the bottom of these. To clean it you need to separate the top and the bottom from each other, hold the flats with a suitably small spanner and twist the top off with some pliers or other.
Once you have it apart you will be able to get a small jet cleaning wire into the hole and clear it.
The hole is much smaller than 75, this is normally the size of the main jet.
It is normal practice to remove the filter in the bottom of these. To clean it you need to separate the top and the bottom from each other, hold the flats with a suitably small spanner and twist the top off with some pliers or other.
Once you have it apart you will be able to get a small jet cleaning wire into the hole and clear it.
The hole is much smaller than 75, this is normally the size of the main jet.