The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.30 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tappet Adjustment process
#31
Hi

Good news !

Things will settle down after you have driven a few miles.

Compression test results will be lower than normal unless you have managed to wedge the throttle open. I suspect that hand cranking will also give a lower result than a starter motor, unless you are superhuman !

Expect around 100 PSI for a high compression head and everything sealing well. A low compression head will read a bit less.
Reply


Messages In This Thread
Tappet Adjustment process - by iandecjak - 06-07-2024, 01:00 PM
RE: Tappet Adjustment process - by Robert Leigh - 06-07-2024, 01:12 PM
RE: Tappet Adjustment process - by iandecjak - 06-07-2024, 02:02 PM
RE: Tappet Adjustment process - by Alan - 06-07-2024, 02:38 PM
RE: Tappet Adjustment process - by John Cornforth - 06-07-2024, 02:40 PM
RE: Tappet Adjustment process - by iandecjak - 06-07-2024, 03:17 PM
RE: Tappet Adjustment process - by John Mason - 06-07-2024, 03:42 PM
RE: Tappet Adjustment process - by iandecjak - 06-07-2024, 04:08 PM
RE: Tappet Adjustment process - by iandecjak - 06-07-2024, 04:36 PM
RE: Tappet Adjustment process - by iandecjak - 06-07-2024, 04:58 PM
RE: Tappet Adjustment process - by Steve Jones - 06-07-2024, 06:28 PM
RE: Tappet Adjustment process - by iandecjak - 06-07-2024, 07:30 PM
RE: Tappet Adjustment process - by Alan - 06-07-2024, 07:46 PM
RE: Tappet Adjustment process - by David Stepney - 06-07-2024, 09:34 PM
RE: Tappet Adjustment process - by iandecjak - 06-07-2024, 10:35 PM
RE: Tappet Adjustment process - by Bluebird7 - 06-07-2024, 10:40 PM
RE: Tappet Adjustment process - by Chris KC - 07-07-2024, 05:42 AM
RE: Tappet Adjustment process - by Charles P - 07-07-2024, 09:08 AM
RE: Tappet Adjustment process - by Steve kay - 07-07-2024, 12:20 PM
RE: Tappet Adjustment process - by iandecjak - 07-07-2024, 03:32 PM
RE: Tappet Adjustment process - by Alan - 07-07-2024, 03:51 PM
RE: Tappet Adjustment process - by Hugh Barnes - 07-07-2024, 04:07 PM
RE: Tappet Adjustment process - by John Cornforth - 07-07-2024, 04:40 PM
RE: Tappet Adjustment process - by Tony Press - 07-07-2024, 11:43 PM

Forum Jump:


Users browsing this thread: 3 Guest(s)