16-06-2024, 10:52 AM
My Ruby has run rich ever since I bought it over 3 years ago. It still ran rich after putting a couple of extra washers under the needle valve. Replacing the needle valve also made no improvement. Today I took out the float and compared it with a float from another carburetor while floating in water. The float on the left in the photo is the one removed from the car. It is a little lower than the other float. So I have now installed the right hand float in the car and will see how that performs.
20240616_093000(0).jpg (Size: 105.95 KB / Downloads: 251)
