09-06-2024, 09:28 AM
(This post was last modified: 09-06-2024, 01:37 PM by Speedex750.)
Well, they didn't on mine! I ended up with a 1/8'' spacer plate to clear the shoulder. Sounds like some may fit and some not; caveat emptor!
Addition; Looking at the same axle on my '38 Opal while doing the brakes this morning I can see that the fronts have virtually no protruding shoulder but it does protrude about 1/8'' outside of the drums on the rear hubs.
Dave
Addition; Looking at the same axle on my '38 Opal while doing the brakes this morning I can see that the fronts have virtually no protruding shoulder but it does protrude about 1/8'' outside of the drums on the rear hubs.
Dave