20-04-2024, 02:57 PM
Hi
On my Pearl, the "Full" mark is 3 3/8 inches below the bottom of the ring. There is no other mark, but the bottom tip of the dipstick is another 1 3/4 inches lower.
I make the area of the sump 52 square inches, so a change in depth of 1 inch represents 52 cubic inches or 1.5 imperial pints.
On my Pearl, the "Full" mark is 3 3/8 inches below the bottom of the ring. There is no other mark, but the bottom tip of the dipstick is another 1 3/4 inches lower.
I make the area of the sump 52 square inches, so a change in depth of 1 inch represents 52 cubic inches or 1.5 imperial pints.