Rear exhaust pipe

[Dave Mann]

In the 60 odd years of running RN saloons I've never found a supplier of the exhaust system for them. The RP system front pipe is the wrong shape to go through the hole in the front cross member so I used a SWB car front pipe which was the right shape and welded a piece on to make it the right length. The silencer was OK and I initially used a tail pipe which exited in front of the RNS wheel. When I learnt the correct tailpipe shape I made one. With the whole system correct I supplied it as a pattern to a stainless steel exhaust maker and this is how it goes.                 . 3 speed RN tailpipes do not go over the rear axle but 4 speed RN tailpipes do go over the axle.