18-04-2024, 06:34 PM
Your tailpipe appears to be the wrong shape. I have just fitted a new exhaust system to my own RP, and the replacement tailpipe has the part after the bends at the same height as the part from the silencer.
The RP exhaust has only two mountings; one at the rear of the silencer, which should have a bracket which bolts to the rear cross member and one at the end of the tailpipe adjacent to the petrol tank.
I have just been out to the garage to see if I could post photos, but it’s too dark in there and the lord only knows what young Leon has done with my inspection lamp. I will try to take photos an post them tomorrow.
The RP exhaust has only two mountings; one at the rear of the silencer, which should have a bracket which bolts to the rear cross member and one at the end of the tailpipe adjacent to the petrol tank.
I have just been out to the garage to see if I could post photos, but it’s too dark in there and the lord only knows what young Leon has done with my inspection lamp. I will try to take photos an post them tomorrow.