14-04-2024, 08:26 AM
What oil did you put in that axle Graham? As others have said its a likely a far wider issue that simply adjustment, I would go so far as to suggest suggest that you have an impending failure on the horizon. Personally I would remove the axle and strip it down for inspection. You might get lucky and after replacing one or two bearings be able to set it up well enough reduce risk of a future catastrophic failure, otherwise unfortunately axle rebuilds are rather costly. I am currently in the process of moving back up to Auckland so if you get it apart I could be available and willing to offer some help and advice. I am not however in a position to do a full rebuild for you at present so you will need to be confident and equipped enough to do the work. Graham O has my number should you wish to discuss.
Black Art Enthusiast