09-05-2018, 05:13 PM
I remember Jim Young also suggested this starting procedure if the car had not been out for a while:
1. Turn the engine over six times on the handle (12 x 1/2).
2. Ensure the carb is primed using the hand lever on the fuel pump.
3. Pull the choke full on (hold with clothes peg) and turn the engine over four more times (8 x 1/2).
4. Put on the ignition.
5. Should start next turn of the handle.
Seems to work well.
Colin
1. Turn the engine over six times on the handle (12 x 1/2).
2. Ensure the carb is primed using the hand lever on the fuel pump.
3. Pull the choke full on (hold with clothes peg) and turn the engine over four more times (8 x 1/2).
4. Put on the ignition.
5. Should start next turn of the handle.
Seems to work well.
Colin