04-04-2024, 10:16 AM
Thank you Roberts (plural) for your suggestions. I will have a go one way or the other.
At least a small cold chisel sounds less severe than an angle grinder!!
I am guessing that quite a few bolts would need removing to jack the body far enough to do the deed. It looks as though the u-bolt needs to go UP a fair way before it can go back.
Happy days - thanks again
At least a small cold chisel sounds less severe than an angle grinder!!
I am guessing that quite a few bolts would need removing to jack the body far enough to do the deed. It looks as though the u-bolt needs to go UP a fair way before it can go back.
Happy days - thanks again