29-03-2024, 02:52 AM
(This post was last modified: 29-03-2024, 02:54 AM by A Spooky Ghost.)
Tore into it a bit more today. The manifold had no nuts, but was stuck really well. Looks like when what ever happened, they tried to take it apart, and just gave up.
Valve chest looks clean. Reized I needed to get the grill off, to easily yank the engine.
I fought that crank handle for several hours. The pin cam out easy.
It took $200. In rental puller tools to get it off.
So the empty cylinder has no baffle plates. If the rod can't come out the block. Then maybe it busted one?
Found a oil sump, if they will send it across pond..
Considering I mainly used just a 14mm spanner, 2 adjustable wrenches, and a hammer. I made decent progress.
Whitworth tools on the way!
Valve chest looks clean. Reized I needed to get the grill off, to easily yank the engine.
I fought that crank handle for several hours. The pin cam out easy.
It took $200. In rental puller tools to get it off.
So the empty cylinder has no baffle plates. If the rod can't come out the block. Then maybe it busted one?
Found a oil sump, if they will send it across pond..
Considering I mainly used just a 14mm spanner, 2 adjustable wrenches, and a hammer. I made decent progress.
Whitworth tools on the way!