26-03-2024, 09:29 AM
(1) At least on the centre rear, is there any thread sticking out on the other side which you could grip? (it breaks out into the flywheel housing).
(2) Warm the case with a blow torch and then try carefully "unscrewing" the broken bolts (i.e. drifting at the circumference in an anti-clockwise direction) with a sharp punch and a ball-pein hammer.
(2) Warm the case with a blow torch and then try carefully "unscrewing" the broken bolts (i.e. drifting at the circumference in an anti-clockwise direction) with a sharp punch and a ball-pein hammer.