25-03-2024, 10:18 PM
Matt
Another alternative is to make strengthening plates that sit in the well of the steel sump flanges. Make sure you get the tin sump flanges flat first then fit strips of 3 or 4 mm plate that fit tightly in the well and are drilled to take studs or bolts as you prefer.
Cheers
Howard
Another alternative is to make strengthening plates that sit in the well of the steel sump flanges. Make sure you get the tin sump flanges flat first then fit strips of 3 or 4 mm plate that fit tightly in the well and are drilled to take studs or bolts as you prefer.
Cheers
Howard