07-03-2024, 07:26 PM
(This post was last modified: 07-03-2024, 07:27 PM by Hugh Barnes.)
After pestering the good folks of the Forum regarding the minutiae of RPĀ door check straps, I have finally answered my own question. The attached photo from the rear of the A post clearly shows 2 holes that will permit screws to be passed through from the 'front' of the A post, through the check strap which is inserted between the A post and the metal bracket.. All I have to do now is find where these are on the A post and drill them out...
Phew, that has made the job a lot easier...
Phew, that has made the job a lot easier...