Joined: Aug 2017 Posts: 1,020 Threads: 53
Reputation:
5
Location: The delightful town of Knaresborough, North Yorkshire
The latest updated list of engines fitted and not needing too much in the way of serious modifications...
So I have taken the V8s out.
Riley 9
Jap
Reliant 750 S/V based on A7
Reliant 850 OHV based on Standard Triumph
3 cylinder 2-stroke
Kubota
A-Series 948
A-Series 1098
A-Series 1275
Lister
Ford model A
Ford 4 cylinder S/V
Rosengart
Honda V-Twin
Rudge
Suzuki G10
Coventry Climax
Electric
Joined: Aug 2017 Posts: 620 Threads: 7
Reputation:
7
Location: queensland
There was a line of Austins parked at Moreton and the general hubub was pierced by a LOUD Pop Pop Bang Bang! Looking to my left arose a large ball of blue smoke, what is that? A joyous scruffy special emerged and with a Bang Bang and hair flying whizzed off into the crowd.
What was that? Sounded like a 1 or 2 cylinder.
Joined: Mar 2015 Posts: 5,446 Threads: 231
Reputation:
67
Location: Scotchland
It was VAT 69, first a 1930 Cleone engine then an ABC Scorpion from 1921?
Joined: Aug 2017 Posts: 628 Threads: 19
Reputation:
11
Location: Sheffield South Yorks
Car type: 1932 RN saloon
Nobody has mentioned the smaller vintage MG engines M type, PA/PB. Probably because they are rare and expensive (and heavy)
Joined: Mar 2015 Posts: 5,446 Threads: 231
Reputation:
67
Location: Scotchland
Have they been used in A7s, Dave?
I know of an MG with a Ford engine it it, just near us, here.
Joined: Aug 2017 Posts: 1,195 Threads: 71
Reputation:
8
The swap of an OHC MG for a later Ford (10?) unit was quite a common thing in the 50s and 60s as the OHC units proved difficult to maintain for the impecunious working in a pre-fabricated asbestos garage with only a hammer and adjustable spanner...
Joined: Aug 2017 Posts: 628 Threads: 19
Reputation:
11
Location: Sheffield South Yorks
Car type: 1932 RN saloon
R, not that I know of but I helped a friend rebuild his MG PA engine. It’s pretty heavy for its standard output of 35bhp but they are sometimes supercharged. I thought that in times past it would have been an option although I think that the relatively complex overhead cam drive via the dynamo getting oiled up caused many to be replaced by a sidevalve Ford 8 or 10.
Joined: Mar 2015 Posts: 5,446 Threads: 231
Reputation:
67
Location: Scotchland
I know nothing of them, just that they look nice, when overtaking me!
Joined: Aug 2017 Posts: 265 Threads: 1
Reputation:
5
MG engines in A7 chassis. The two I am aware of were Ken Wharton’s very successful hill climb car circa 1948 and young Colin Vandervell’s Cambridge Special of the J2 variety. I believe both were o h c engines.
Regards
Stuart
