RP Sunroof Tracks - Drainage Slots

[Chris KC]

Based on a survey of various cars and photos I believe original RP sunroof track sets had two rectangular holes just aft of the roof opening to allow water to escape - something like this:

  Screenshot 2023-11-16 171111.png (Size: 114.37 KB / Downloads: 232)
  Screenshot 2023-11-16 170842.png (Size: 346.49 KB / Downloads: 232)

Is anyone able to share some dimensions please i.e. length x height of each hole & their position in relation to the cross-bar of the metal frame? 

Thanks in advance...

[Tiger]

Yes that’s exactly the same on my Ruby.
I believe when closed one slot each side the back sliding edge.
One to drain the front and one to drain the back.
I know there is a diagram in the “Source Book”
Not sure it’s dimensioned ?

[Dave Mann]

That's similar to the RN sunshine ro         of

[Tiger]

   

This may be useful

[Chris KC]

That's similar to the RN sunshine roof

Thanks Dave. Looks a little different to me though - the RP holes are cut through the side of the rails themselves.

---

This may be useful

Hi Tiger - yes, those are Phil Baildon's drawings which are preserved in the A7 Archive. No detailed dimensions though for RP drain holes.