The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fabric Joint Propshaft Lengths
#21
little raised triangle on underside of spider of 20"; nothing at all on a 19.5"...
Reply
#22
Firstly not saying David K is wrong in that BP 73 and BP 93 are both 19.5" long, as who can be 100% and I suppose is why we share info

I found the prop with the part number it is hard to read but belive it is 7087 A1 so BP 73, forgot to measure it  Sad


.jpg   IMG_7683 (002).jpg (Size: 50.4 KB / Downloads: 60)

Also had a look at the index cards and noticed that the part number for BP28 is hand amended to the same as BP93.  Does this mean they are the same length?.....   Should I just give up....

   
Reply
#23
well observed!

With the length of the carden socket being 3" or so, then one might assume that 1/2" variation could allow generic use when replacement became due.

Where should the carden blocks 'sit' in the joint/socket when fitted on level ground/car not weighted?

Perhaps we now need to measure axle to carden joint lengths on the three types of axle.
Reply


Forum Jump:


Users browsing this thread: 8 Guest(s)