Joined: May 2018 Posts: 2,106 Threads: 110
Reputation:
22
Location: Llandrindod Wells
Car type: 29 Special, 30 RK, 28 C Cab
Hi Renaud
Great pic, thanks for posting.
The huge spotlight is one way of rectifying weak headlights but would probably eat dynamo output.
Cheers
Howard
Joined: Aug 2017 Posts: 3,004 Threads: 168
Reputation:
37
Location: Sherwood Forest
Car type: 1938 Talbot Ten Airline
Lovely photo. The production numbers were not so different, Austin produced around 14,000 Sevens in the first four years. It was only with the factory reorganisation in 1925-26 that production jumped (another 14,000 in 1926 alone).
Joined: Aug 2017 Posts: 261 Threads: 1
Reputation:
5
It may be that the huge spotlight burns acetylene. Hard to be sure from the photo.
Regards,
Stuart
Joined: Aug 2017 Posts: 2,400 Threads: 33
Reputation:
36
Location: Deepest Frogland 30960
Car type: 1933 RP Standard Saloon
One of the service areas on the motorway near Mulhouse has a Quadrilette on display in the main concourse, along with other Peugeot exhibits.
Joined: Jan 2019 Posts: 1,567 Threads: 20
Reputation:
14
Location: Bala North Wales
Car type: 1933 RP Standard Saloon
Absolutely fascinating! Is it a case of similar problems engender similar solutions, or did either Herbert Austin or Stanley Edge have the Bebe Peugeot in mind during the design stage?
Joined: Aug 2017 Posts: 3,004 Threads: 168
Reputation:
37
Location: Sherwood Forest
Car type: 1938 Talbot Ten Airline
I'm quite sure Herbert Austin had the Peugeot very much in mind. He was a confirmed Francophile, and Peugeot was a leading manufacturer, so he could hardly have been unaware of the existence of the company's products. Stanley Edge claimed he was not aware of the Peugeot, or at least that it did not figure in his input, but I think that was because HA had already prepared the ground with Peugeot influence before SE started on the project.
Joined: Aug 2017 Posts: 502 Threads: 13
Reputation:
8
Great picture - lovely looking car.
Joined: May 2018 Posts: 2,953 Threads: 558
Reputation:
20
Location: Peak District, Derbyshire
Car type: 1929 Chummy, 1930 Chummy, 1930 Ulster Replica, 1934 Ruby
I love front axle design - the details are so, well, elegant... The back axle, too, with its rather complex, individually-adjustable, rod-operated brakes. There is one of these cars in the Automobile museum below the Foundation Pierre Gianadda in Martigny, Switzerland, not far from where one of my sons lives. Next time I'm there, I'll take a much closer look.