Joined: Mar 2015 Posts: 5,443 Threads: 231
Reputation:
67
Location: Scotchland
(11-05-2024, 10:09 AM)Howard Wright Wrote: Hi Jim and Ruaridh
Hmm, I’ve tested all the coils I have (six) and all are around 1.1 to 1.4 Ohms across the +/- terminals. Most are purchased in the last few years or new! All seem to work well with points and one with the Doctor Distributor electronic ignition. Is a 12volt coil the answer? If so what do I need to do to fit it or does it just replace the six volt?
Cheers
Howard
Just fit a 12v coil with more than 2.4 ohms, nothing else needed. 1.1 and 1.4 ohms will eat the trigger units quickly.
Rupert, happy to chew the fat over your problem, if you want to call...
Joined: May 2018 Posts: 2,110 Threads: 110
Reputation:
22
Location: Llandrindod Wells
Car type: 29 Special, 30 RK, 28 C Cab
(11-05-2024, 12:17 PM)Ruairidh Dunford Wrote: (11-05-2024, 10:09 AM)Howard Wright Wrote: Hi Jim and Ruaridh
Hmm, I’ve tested all the coils I have (six) and all are around 1.1 to 1.4 Ohms across the +/- terminals. Most are purchased in the last few years or new! All seem to work well with points and one with the Doctor Distributor electronic ignition. Is a 12volt coil the answer? If so what do I need to do to fit it or does it just replace the six volt?
Cheers
Howard
Just fit a 12v coil with more than 2.4 ohms, nothing else needed. 1.1 and 1.4 ohms will eat the trigger units quickly.
Rupert, happy to chew the fat over your problem, if you want to call...
Hi Ruaridh
Thanks two 12 volt coils on order.
Howard
Joined: Aug 2017 Posts: 174 Threads: 53
Reputation:
0
11-05-2024, 04:44 PM
(This post was last modified: 11-05-2024, 04:44 PM by RupertW.)
Thanks Ruairidh, I may well be picking your brains soon!
Meanwhile I did have a successful run to the shops:
Joined: Mar 2015 Posts: 5,443 Threads: 231
Reputation:
67
Location: Scotchland
(11-05-2024, 01:33 PM)Howard Wright Wrote: (11-05-2024, 12:17 PM)Ruairidh Dunford Wrote: (11-05-2024, 10:09 AM)Howard Wright Wrote: Hi Jim and Ruaridh
Hmm, I’ve tested all the coils I have (six) and all are around 1.1 to 1.4 Ohms across the +/- terminals. Most are purchased in the last few years or new! All seem to work well with points and one with the Doctor Distributor electronic ignition. Is a 12volt coil the answer? If so what do I need to do to fit it or does it just replace the six volt?
Cheers
Howard
Just fit a 12v coil with more than 2.4 ohms, nothing else needed. 1.1 and 1.4 ohms will eat the trigger units quickly.
Rupert, happy to chew the fat over your problem, if you want to call...
Hi Ruaridh
Thanks two 12 volt coils on order.
Howard
You still need to check they have more that 2.4 ohms, my experience is that they do...
Joined: Mar 2015 Posts: 5,443 Threads: 231
Reputation:
67
Location: Scotchland
(11-05-2024, 04:44 PM)RupertW Wrote: Thanks Ruairidh, I may well be picking your brains soon!
Meanwhile I did have a successful run to the shops:
Hooray!
Joined: May 2018 Posts: 2,110 Threads: 110
Reputation:
22
Location: Llandrindod Wells
Car type: 29 Special, 30 RK, 28 C Cab
(11-05-2024, 07:20 PM)Ruairidh Dunford Wrote: (11-05-2024, 01:33 PM)Howard Wright Wrote: (11-05-2024, 12:17 PM)Ruairidh Dunford Wrote: (11-05-2024, 10:09 AM)Howard Wright Wrote: Hi Jim and Ruaridh
Hmm, I’ve tested all the coils I have (six) and all are around 1.1 to 1.4 Ohms across the +/- terminals. Most are purchased in the last few years or new! All seem to work well with points and one with the Doctor Distributor electronic ignition. Is a 12volt coil the answer? If so what do I need to do to fit it or does it just replace the six volt?
Cheers
Howard
Just fit a 12v coil with more than 2.4 ohms, nothing else needed. 1.1 and 1.4 ohms will eat the trigger units quickly.
Rupert, happy to chew the fat over your problem, if you want to call...
Hi Ruaridh
Thanks two 12 volt coils on order.
Howard
You still need to check they have more that 2.4 ohms, my experience is that they do... Three Ohm is specified.
Howard
|
