13-05-2021, 03:45 PM
Posted on behalf of a friend who has access to a small number of new old stock, 1 1/2" splash, part finished, billet, crankshafts. These were manufactured by a well known, respected and long established manufacturer and only seven are available after I took an option on an eighth.
They have been machined, threads cut and taper formed. They need stress relieving, grinding, nitriding and a final grind and polish. If you don't understand what's required and/or don't know how to go about getting this done, these cranks are not for you. The price isn't finalised but will be very soothing! Significantly less than a finished crank even allowing for the cost of the finishing work required. Cash only, no cheques, bank transfers of cards. UK only.
First come, first served. Contact me by Private Message only please.
Steve
They have been machined, threads cut and taper formed. They need stress relieving, grinding, nitriding and a final grind and polish. If you don't understand what's required and/or don't know how to go about getting this done, these cranks are not for you. The price isn't finalised but will be very soothing! Significantly less than a finished crank even allowing for the cost of the finishing work required. Cash only, no cheques, bank transfers of cards. UK only.
First come, first served. Contact me by Private Message only please.
Steve