01-06-2019, 05:38 PM
I don't have a filter (cylindrical wire mesh) in the banjo connection at the carb. I cannot locate one....someone must make them! It is probably the same as on other Zeniths, but Burlen don' t seem to have one listed.
I had Chitti running today & took it down the road, but came back on the end of a rope! After about 2 miles it lost power & eventually "caught" with a dose of ether & a hand over the intake. I got within 400 yards of home & it died!
I have the carb off & it was still pretty dirty inside & the main jet was probably blocked by something, so another go in the ultrasonic bath. Try again tomorrow!"
I had Chitti running today & took it down the road, but came back on the end of a rope! After about 2 miles it lost power & eventually "caught" with a dose of ether & a hand over the intake. I got within 400 yards of home & it died!
I have the carb off & it was still pretty dirty inside & the main jet was probably blocked by something, so another go in the ultrasonic bath. Try again tomorrow!"