21-01-2018, 09:14 PM
(This post was last modified: 21-01-2018, 10:50 PM by AllAlloyCup.)
Hi I’m building up a pair of old Lucas
AT201 tail lamps but am missing the
Rear cable shroud and the brass retaining collar
That screws onto the rear of the bulb holder.
If anyone has odd bits of AT201 they don’t need I’d be
keen to buy them, or swap stuff.
Regards
Bill G
( aka AllAlloyCup)
AT201 tail lamps but am missing the
Rear cable shroud and the brass retaining collar
That screws onto the rear of the bulb holder.
If anyone has odd bits of AT201 they don’t need I’d be
keen to buy them, or swap stuff.
Regards
Bill G
( aka AllAlloyCup)
Based near the Scottish Border,