The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval



Austinsevenfriends › Austin Seven Friends Forum › Forum chat... v
dynamo output

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
dynamo output
12jslater Offline
Member
***
Joined: Jul 2018 Posts: 102 Threads: 33
Reputation: 1
#1
22-05-2021, 09:46 PM
What is the safe maximum output for a standard dynamo operating at 6 volts? i want to convert to a 2 brush dynamo but want to limit the current as to not damage the dynamo.

Hope to hear back!
Reply
Bob Culver Offline
dogged member, NZ
*****
Joined: Aug 2017 Posts: 2,748 Threads: 31
Reputation: 95
Location: Auckland, NZ
#2
22-05-2021, 11:41 PM (This post was last modified: 22-05-2021, 11:59 PM by Bob Culver.)
Armature current is the basic limitation. Normally, this is directly related to output as shown by the ammeter. Opinions differ as to the exact limit  but car originally somewhat exceeded total running and lamp load... with just 18w bulbs! Corresponds about 10amp on ammeter lights off (35M). Assumes coil current as original. The field originally operated on about 5v max ; dont know how survive on full 6v.The field current is not included in ammeter and any increase adds to armature load. 2 brush operation requires some form of regulator and at full output must ensure armature current not excessive.
Dunno what your aim is but the original system works with original lamp load, and with more if not going for hours at night.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)