Grease nipples- two types

[AllAlloyCup]

Hi folks

I see the A7Workshop lists two types of threads 
On their nipples ,1/8” and 5/16”

Are both types to be found on 1928
Axles and other parts?, steering box, draglink etc
Torque tube mounting?

Some are BSf and others BSp , 
what’s the criteria that governs how they are used?
Regards

Bill G

[Ruairidh Dunford]

Your car will most likely use the 1/8 BSP ones Bill - I think the other type are use on Girling stub axles.

[AllAlloyCup]

Thanks Ruairidh...I’m changing all the nipples to the
Snap on type to fit the Wanner grease gun bought with my first ever
Pay packet from MCLays Garage, when I was a student.
A Very long established Morris MG franchise, friend of Wm Morris.
Their parts store was full of prewar spares! I got a new Gold Seal
Morris 8 sidevalve engine for £10! At the same time Tom
Was building his first Brooklands in his conservatory....

Regards

Bill G