The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Alternative engines in an Austin Seven
#51
(22-01-2024, 09:09 PM)john williams Wrote: I remember seeing, but cannot remember where, a clip of an Austin 7  bare running chassis, drivers seat ,being driven on a sort of trials Event. The Austin was powered by a Hillman Imp engine coupled to standard A7 transmission and wheels. I have often wondered why the Imp engine was not more widely used.

Why the Imp engine is not used?.....  well they had a really bad name for head gasket reliability, and they were a long time ago. And there was no easy gearbox to use.
Reply
#52
For those tempted to go in this direction and stray beyond polishing your ports, look where it might all end?

   

https://www.ebay.co.uk/itm/285658127020
Reply
#53
This is quite a time appropriate thread.

I have accidentally just acquired a flathead Ford V8 engine from 1936 - its UK built, so is the smaller 2.2 litre displacement (and its actually quite a compact thing).

In an idle moment I was thinking whether it would, or could be made, to fit an Austin 7 chassis. Does anyone know of this being done before?
Reply
#54
So, what about gearboxes, and brakes? Were the different engines mated to the original (rather short) seven gearboxes? Or, for example, was the A-series engine using an A-series (rather long) gearbox? And if so did that mean doing away with the brake cross-shaft?
Reply
#55
I have seen a few of the ford sidevalve engines described that look to have been coupled to a standard A7 gearbox via a second short propshaft infront... not sure where the box was mounted.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)