18-02-2018, 08:38 PM
Hi
What is available to stop the end of the brake cable from fraying ?
Thanks everyone
What is available to stop the end of the brake cable from fraying ?
Thanks everyone
The following warnings occurred: | ||||||||||||
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
|
Brake cable fraying
|
18-02-2018, 08:38 PM
Hi
What is available to stop the end of the brake cable from fraying ? Thanks everyone
18-02-2018, 09:09 PM
18-02-2018, 10:00 PM
Doesn't happen very often but when it does, I've used shrink sleeve successfully.
Steve
18-02-2018, 10:51 PM
19-02-2018, 12:32 AM
(18-02-2018, 10:51 PM)Tony Press Wrote:The cables now sold in the UK are adjustable at the forked end Tony, with the cable end exiting through an escape hole and secured by a pinch bolt. A dob of solder at the fraying end can save pricked fingers.(18-02-2018, 08:38 PM)morrisminor Wrote: Hi Never store your spare coiled up brake cables under the passenger seat, ask me how I know this !! cheers Russell
19-02-2018, 11:16 AM
Having had problems with an old cable fraying back into the pinch bolt, making adjustment almost impossible and I assumed making the cable dangerous to assume it was pinching, I soldered the end of the new one, which also had about a foot of extra length anyway and all seems good and was v easy to do (on a new cable anyway). I was tempted to touch it with MIG but the solder is neater I think and there is no strength required.
Andy B
Enjoy yourself, it's later than you think!
19-02-2018, 01:04 PM
Black nylon cable tie works ok.
19-02-2018, 01:52 PM
(19-02-2018, 12:32 AM)squeak Wrote:Be a devil Russell, Dont keep is in suspense.(18-02-2018, 10:51 PM)Tony Press Wrote:The cables now sold in the UK are adjustable at the forked end Tony, with the cable end exiting through an escape hole and secured by a pinch bolt. A dob of solder at the fraying end can save pricked fingers.(18-02-2018, 08:38 PM)morrisminor Wrote: Hi Geoff - Norhing to add.
19-02-2018, 02:25 PM
Geoff, i'm sure your imagination can paint a sufficiently lurid picture. To give it something to work on, lets say the cable welds itself to the terminals and I instantly stop a fire with my bare hands. My NEW front cable MAY still be OK as a rear, I must look now you have made me think. cheers Russell
|
« Next Oldest | Next Newest »
|