Joined: Aug 2017 Posts: 3,329 Threads: 372
Reputation:
16
Car type:
17-08-2018, 09:18 AM
(This post was last modified: 17-08-2018, 09:22 AM by JonE.)
My oil button isn't popping out though engine seems healthy and sounds ok!
What is my diagnosis route? - do I start off with rodding the jets, or just look for breached membrane and find some bacon box wrapping? Or just bang it in a particular place if it hasnt been used for 20 years?
Joined: Aug 2017 Posts: 3,329 Threads: 372
Reputation:
16
Car type:
Thanks. ok. that will be my first check tomorrow! (it's a mkII button)
Joined: Aug 2017 Posts: 1,808 Threads: 99
Reputation:
21
It doesn't hert to check the jets.
ButĀ First thing is to fit a proper oil gauge, only needs to be temporary. So you can check what oil pressures you are getting.
Then you will know if the button is at falt.
Tony.
Joined: Aug 2017 Posts: 3,329 Threads: 372
Reputation:
16
Car type:
good plan. I think as mine is largely remade from the chassis rails up, it probably deserves a permanent gauge perhaps - so I have something else to entertain passengers with.