Joined: Aug 2017 Posts: 686 Threads: 112
Reputation:
2
I ordered bonnet weatherstrip for my Ulster Rep from one of the cherished suppliers. I came and the profile matched the profile in Fig. 29 of Chris Gould's book. Unfortunately, it is vinyl, not rubber. So ordered another weatherstrip from another cherished supplier. This is rubber, but the profile is much larger than in Fig. 29 of the Chris Gould book. Can anyone point me to a correct rubber one? The Gould book says it is available from the "usual stockists".
Erich in Seattle
Joined: Aug 2017 Posts: 3,391 Threads: 106
Reputation:
28
Location: Darkest Bedfordshire
Erich I think that view in Chris Gould's book is a sketch rather than a scale drawing.
Mine is similar shape & 1" wide and looks about right, though I can't vouch for original dims.
Nowadays it may be a question of what you can get - in fairness to Chris his book was first published over 35 years ago!
Joined: Mar 2015 Posts: 5,442 Threads: 231
Reputation:
67
Location: Scotchland
What is the issue with it being vinyl please?
Joined: Aug 2017 Posts: 686 Threads: 112
Reputation:
2
Ruairidh, the vinyl I have is shiny, rather than the dull of natural rubber. It is also rather firmer than rubber so doesn't conform as well.
Erich in Seattle
Joined: Aug 2017 Posts: 2,400 Threads: 33
Reputation:
36
Location: Deepest Frogland 30960
Car type: 1933 RP Standard Saloon
Give it a rub with some steel wool.
Joined: Mar 2015 Posts: 5,442 Threads: 231
Reputation:
67
Location: Scotchland
I was thinking the same, perhaps grit blast it?
Stretch it over the non-conformities!
