Austinsevenfriends
Bacon Slicer Starter question - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Bacon Slicer Starter question (/showthread.php?tid=9594)



Bacon Slicer Starter question - Robin Gooders - 20-09-2024

Good Morning. 

I hope someone may be able to help me with this ?  I'm trying to put together a good Bacon Slicer Starter from two units, and in the process also cure the annoying habit my old unit has of the pinion creeping forward and touching the flywheel ring gear (Ting ting noise)

My question is, should the sprung damping pin, which prevents the pinion from creeping, bear on the bottom of the spiral thread/ groove? or the outside/ top of the groove?  Of the two units I have, one seems to naturally align to the bottom of the groove, and one to the outside. Not sure if this is as a result of mixing up parts from different units. Anyone know which is correct please?

Best wishes,
Robin


RE: Bacon Slicer Starter question - Chris Garner - 20-09-2024

Robin. I seem to remember it's the former.


RE: Bacon Slicer Starter question - Robin Gooders - 20-09-2024

Thanks Chris, that's a great help.

Best wishes

Robin


RE: Bacon Slicer Starter question - Dave Mann - 21-09-2024

here's a pic 
.jpeg   03C6B1EB-5DFF-4949-BDB3-06847F090816.jpeg (Size: 96.24 KB / Downloads: 186)


RE: Bacon Slicer Starter question - Robin Gooders - 21-09-2024

Thanks Dave,

Looks like it's on the outside of the groove.
I appreciate you taking the time to photograph it for me.

Regards, Robin


RE: Bacon Slicer Starter question - AustinWood - 22-09-2024

I beieve that it is the top of the groove.


RE: Bacon Slicer Starter question - Robin Gooders - 25-09-2024

Thanks everyone for your helpful replies

Robin